How To Make Horns Out Of Cardboard

How to brand a rhino horn out of cardboard. How to make paper goat horns

Adept solar day.

I want to bring to your attention a souvenir for the "Real Homo" fabricated with my ain hands - a vino horn, which, as you will see, is not hard to make from improvised materials.

In the Caucasus, the horn symbolizes hospitality, in other cultures - backbone. The peculiarity of such a vessel is that it cannot exist put or placed if there is wine inside, so y'all need to drink to the bottom. Of course, yous can drink from it, just initially it was conceived every bit an element of decor. In general, especially harmful materials were not used - food grade aluminum, water-based acrylic paints, if boiling water is non poured, then it's okay.

Materials and tools

And then, to create such a product, nosotros demand:

1. A4 paper - five sheets
2. Aluminum foil (blistering dish)
3. Acrylic putty
4. Acrylic paints and varnish
5. Cold welding (for tip boss)
6. Walker concatenation.
7. Glue for paper.

The tools are the simplest:

1. Stationery knife
2. Scissors
3. Ballpoint pen (optional)

Making a Caucasian horn

1. We dissolve the sheets of paper into ribbons 1 centimeter wide and glue them into ane long ribbon, which we tightly twist into a scroll similar a tape, just with a slight departure (almost ane millimeter) to result in a cone.

I used glue stick, it dries faster. I glued ten tapes, which I then twisted, and so on until the desired cone size.
The resulting cone is aptitude in the form of a horn, that is, in several planes.

2. Nosotros fix the grade with acrylic varnish by only rinsing the inner surface of the production. After drying, the turns of the tape are glued together, and the shape of the horn will not modify.

3. Exterior, we cover the arts and crafts with putty, then we process information technology with sandpaper of medium dust, and if there are irregularities, then repeat the process until the surface is completely leveled.

Iii colors of paint were used for painting - white, ocher and black. The paint was applied with a sparse brush and immediately smeared with a finger along the centric to simulate the texture.

four. We make the edging from foil, from which baking dishes are made. The foil is thick enough and plastic plenty to squeeze out a design on it.

We make a template from paper, on which we first draw the edging ornament. Then we paste the template on the foil and press the pattern with a ballpoint pen.

We cut out blanks with a small allowance for the lock and rolling.
Nosotros make the inner edging without a pattern, just drive the foil cone cut out according to the same template within, note how much the browse needs to be shortened and and so connect the cone into a elementary lock. With the outer cone (which is with a pattern), we perform the same operation.

five. After the cones take been put on, we put a wire ring inside to fasten the concatenation and roll it with the outer cone.

We practice the tip in the same way, the cartoon needs to be made smaller, since the scan turns out to be pocket-size.

6. I fabricated the boss from cold welding - I merely fashioned something unthinkable like from plasticine, then painted it with silverish.

7. And finally, we attach a chain. Well, that's all, as a effect, this is what happened:

I hope you liked information technology.

Happy New Year, everyone! I plan to celebrate information technology with my family unit and at present I will sit down for the script, but I decided to bear information technology in the form of a Goat. Not blueish, non green, just natural beige goat. My husband is a terrible monogamous, so I had to brand the horns myself.

If you like what I did, then read how and make your ain unique horns (bluish, green and any comes to listen).

Nosotros will need:

0. RIM with teeth. He is not in the photo, merely without him nowhere. Teeth are also required, otherwise your horns and ears will "fidget" along the rim wherever they please.

1. Thick wire for the frame (mine is somewhere effectually 2-3mm)

two. Fine wire (0.3mm)

2.1 I accept a twisted thin piece lying around from the last craft, I utilise it for fastening.

iii. A skein of thick white thread

4. Gilt thin rubberband band (I have an elastic ring, you can also thread, probably)

Tools: Claw #2 and scissors

All this, of form, tin can vary depending on the desired consequence.

First, I made the basis of the horn with the assist of a vitamin cap. Get out the tail a few centimeters, and then adhere this matter to the rim. Information technology's even amend to make a frame and a foursquare one, simply I realized this later.

Then we lift the long terminate of the wire and brand a triangle. I made xv cm, considering. 15th year, but it turned out to be quite long. Farther as in the photograph: a xc degree angle in a circumvolve and another wireframe triangle on summit.

I stock-still the wire joints with double thin wire.

We make two such blanks and bend them like a goat. I bent them as in the photo and when I started to attach to the rim, I got a devil, non a caprine animal! My husband laughed all evening, and I was waiting for praise. So think carefully well-nigh how you will fasten them and in which direction to curve them.

ATTENTION! Nosotros put an air loop of our thread on the tip of the horn and begin to wind it, I thought, simply the thread rolled naughtily along the horns!

Therefore, you offset need to wrap the horns with sparse wire to give them ribbing.

I left the tail at the loop quite long, walked it in a circle, attaching it to each corner to set up the thread.

Now we wind the thread on the horn.

At the tip, y'all can cheat and wrap information technology with a slice of white material to hide the wire.

After we get down, wrapping already wrapped. Put aside the panic, if during the second winding it turns out that the first ane is, equally it were, weaker, everything is the same with me! Simply wrap it upwardly well.

At the end, nosotros fix the thread on the wire and hide information technology inside the horn.

When you have finished with the start horn, remove the second bare that fell to the floor from the kid's mouth and practise the same with it.

As you can see, my first horn came out thinner than the 2nd, then I will wind more threads around it. I volition start from the elevation, throwing an air loop on the top of my head, and wrapping the tip in a winding.

In the process of winding, compare what you lot get, and why I didn't immediately compare, oh, this "maybe".

I'grand going to decorate. I put a loop of gold elastic on the "leg" of the horn and rise in a spiral to its crown (I endeavour to keep the distance between the lines about i cm).

At the top of the head, I inserted a piece of sparse wire into a white thread and fixed a gilded elastic band with it.

Subsequently that, I plough the elastic ring dorsum and follow information technology forth the already laid path (it turns out a winding in two threads), and I hide the wire forth the white threads.

The horns are set up, the ears are left.

Ears I crocheted, trying and making mistakes on the go. I volition lay out the scheme, do non judge strictly and forgive those who are not familiar with the hook, but there is no time to describe in particular, and this is not the topic of my MK.

I scored xv air loops, went downwards with connecting posts (14).

1st row: ch iii lift and 13 double crochets, 5 st.southward.n. in the 15th v.p. and over again xiii st.s.n.

3rd and fourth rows are similar to the 2nd, but

three: * 2st.s.n and 2st.s.north in 1 loop *

4: * 3st.s.n and 2st.s.n in one loop *

Hither is an ear turned out, you lot just need to fold the base of operations in half and run up.

Now nosotros collect everything on the rim. I already wrote that I aptitude the horns in the wrong direction, so one of my "fastening legs" didn't come out at the rim and I just stretched it to the opposite corner.

The horns are in place, the ears remain.

They were crocheted, the thread was pulled inside the ear, tied with a ponytail from the beginning of piece of work and cut off.

That'south information technology! I hope the symbol of this yr and all who read will be satisfied.

Happy New Yr, dear reader!

Recently, deer antlers accept get a popular accessory for photograph shoots and boho weddings. This stylish detail is used with pleasure on postcards and illustrations, in costumes and in the interior. If yous urgently demand horns, and the deer that will drop them for you is not around, I will show y'all how to brand horns with your ain hands.

In many cultures, the deer is identified with light and cosmos. The ability of this animal to shed and abound new antlers has always seemed like a phenomenon, so deer have become a symbol of renewal and a new beginning.

The historical entry of horns into interiors, as accessories decorating the walls, was noted at the starting time of the 19th century and exclusively in the homes of aristocrats. And this detail was massively used in the so-called Alpine manner.

How to make deer antlers - materials and tools

It will take us most an hour to make deer antlers with our own hands. They are fabricated in 2 stages. It takes about 30 minutes to complete the blank and mucilage it with paper. Afterward the glue dries, information technology takes some other xx minutes to paint the finished product. Length: 32 cm.

• Aluminum wire - ane m
• Pliers
• Sintepon or other filler - cutting approximately 25 x 10 cm
• Masking record 3 cm broad or foil
• PVA glue
• paper or paper
• tassel
• Acrylic paints in different colors.

How to brand horns with your own hands - the progress of work

I volition show you how to brand papier mache antlers. If you plan to dye them in darker colors, you tin use newspaper, and if the horns are light, it is better to apply sparse white paper. Ordinarily thinner is the white paper that is sold for writing, not for the printer. But if there is none, a tighter one volition also do. It just needs to be kneaded longer to brand information technology more pliable.

ane. Accept aluminum wire and shape it into deer antlers with pliers. To form horns, you lot can discover a real moving-picture show on the Internet, overstate information technology and simply echo the outlines.

2. Then far, it doesn't really look like antlers. To add together volume, tear off pocket-sized strips of synthetic winterizer, wrap them around the wire and fix with masking record. If masking record is not available, foil can exist used. At the base of the synthetic winterizer should be more. The closer to the tip, the less filler is needed.

3. Now we have the newspaper, knead it well and tear information technology into small strips.

4. We spread PVA on each strip and gradually glue the workpiece. Information technology is better to glue the horns in ii-3 layers to make them strong enough.

5. After the glue dries, you can start painting. Traditionally, the tips and middle are dyed a brighter color. You can separate the areas to be painted with masking record or depict the borders with a pencil if the surface is non completely flat.

To be able to paint all the details at once, the horns can be hung on a ribbon.

Allow the paint dry and relish the issue.

I fabricated another larger horns and gave them a worn effect.

Exercise-it-yourself deer antlers - ideas for application

With a trivial imagination, deer antlers can exist played with in completely unpredictable ways and find many uses for them.

• Have a fun photo shoot with friends
• Make bloom stands out of horns
• Decorate your wedding arch with horns
• Make deer antlers a boho bouquet element
• Fit into the central composition of the tabular array or use in serving
• Make a jewelry stand
• Use equally curtain holders
• Decorate with horns a wreath on the door
• Use equally wall decoration
• Put wedding ceremony rings on the horn for a photo shoot
• Hang Christmas decorations or decorative elements on the horns
• Employ as office of a costume.

And many more stylish ideas that just come to your mind.

We acquit our children'southward impressions of the celebration of the New year's day through our lives, and every bit adults, we strive to requite the holiday to our children. What could be more fun than a costumed carnival with family and friends?

The upcoming 2015 is the twelvemonth of the Goat or the Sheep. According to Eastern behavior, it will bring positive changes to the lives of those who seek to change their way of life. In order for all our plans to come up true, the New year should be met in a good mood, in a noisy company at a generous table! Arrange a real carnival for your family! I of the key symbols of the coming 2015 is a wooden figurine of a goat or a sheep. They can decorate the festive table and Christmas tree. All family unit members - participants in the holiday - can clothes up in costumes of sheep and goats. Pair costumes tin be the best ornamentation of the holiday! Mother Goat-Dereza and babe Goatling, Baby Sheep, Shaun the Sheep, Fiery Aries - there are enough images for anybody!

We make a New Yr'south costume

Actually, any festive clothes can deed as a children's New year's goat costume, which tin simply exist supplemented with accessories - ears, horns, tail. If it is quite simple to brand ears and a tail from a piece of fur, so yous volition accept to work difficult on the horns. Horns tin can be fabricated with your own hands using improvised tools and materials for creativity - plastic cups, cooking foil, cotton, paper, glue and paints, cocky-hardening clay, plastic, etc.

Fabric horns

The easiest way to make beautiful footling goat horns is to sew them from their fabric using a simple design that you tin pre-describe on paper.

Felt is well suited for such horns - information technology is soft, pliable in piece of work and perfectly holds its shape. Horns from this fabric tin can be stuffed with padding polyester.

Funfair costume horns, Aelin workshop, Moscow

Costume "Caprine animal", art workshop "Colombina", Kharkiv

Cloth horns can be attached not merely to the headband, but also to the hat. The chapeau can be crocheted or sewn from a suitable material.

Small plastic horns

Sculpt small cones from plastic (self-hardening polymer dirt) (determine the size yourself, based on your idea). Requite them a bend and use relief to the uncured surface with a wooden stick or toothpick. Leave the clay to dry out for several hours.

Afterward the horns dry out, pigment them in a suitable color, and rub the irregularities of the texture with a contrasting paint. In this case, argent and black pigment is used. You can make horns of any color, considering they are designed for a carnival New Year'south costume! Now nosotros are solving the question of how to attach the horns to the hair. In this case, information technology is proposed to employ hairpins.

Horns fabricated of polymer clay

They are suitable if the horns are light in weight. Heavy horns will not concur like this and information technology is better to attach them to a wide rim, like cloth horns.

Paper horns

Large sheep horns can be easily made out of paper. For strength, use cardboard. Cut the paper-thin into long strips and roll them into spirals, gluing as yous twist. Hot glue is well suited for gluing, which will give an additional texture to the product. The spiral tin can be made not solid, just from rings of diverse diameters, gluing them in series.

After the base of operations of cardboard and gum has dried, cover the horns with thin paper (napkins volition do) to prepare the surface for applying paint. With the help of napkins and glue, you can requite the horns the desired texture past making folds. Let the paper dry and start painting! Choose colors that will be in harmony with the hair colour of the person who will wear this funfair decoration, and the color of the costume. It is more user-friendly to attach big horns to a hairband, which can additionally exist fixed on the pilus with hairpins and stealth pins.

You can starting time preparing a New year'due south goat costume for a child and for all family members right at present, in that location is not and then much time left before the New Twelvemonth - very shortly wonderful festive evenings look us all in the circle of loved ones!

Do not know how to make goat horns with your ain hands? Read the article. It offers many options: both flat and voluminous. They are easy to brand, and can be used for paper sculptures or decorating a goat on a postcard, and for a fancy New year'south costume. Using the presented technologies, information technology is like shooting fish in a barrel to make horns of diverse shapes, suitable not only for a goat. Read, written report, cull, practise.

Materials and tools

If yous know how to make your own caprine animal horns out of fabric, simply don't have time for that, there is an alternative quick way - apply a apparently sheet of paper. In addition, you will demand the following:

• Pencil and eraser.
• Scissors.
• Gum (for complex options, you tin can use a thermal gun, if you have i).

From a limited gear up of tools, it is easy to brand beautiful and realistic horns.

How to make practise-it-yourself goat horns out of paper?

The photos in the commodity conspicuously demonstrate that there are several options:

• Cut apartment products of the appropriate shape.
• Using the same configuration, make elements from the corrugated edge of a disposable paper plate.
• Twist volumetric parts in the grade of cones.
• Create more than realistic paper tape horns.
• Use the papier-mâché technique.

So, there are many means. Cull for yourself how to make goat horns with your own easily. The first ones on the list to a higher place are the simplest. It takes a couple of minutes to make them. The last two options will require a little more time, but the result will exist much more effective and realistic.

The simplest method

Let's draw in more detail the technology of how to make goat horns with your ain easily apace and hands. Work similar this:

All is ready. Y'all can try on the product for your paper caprine animal.

Volumetric quick-cooking horns

Below is another way to make practise-information technology-yourself goat horns out of newspaper. The photo shows the construction. It is made in the form of a regular cone.

This is the easiest method to get voluminous horns. The sequence of actions is as follows:

1. Draw two identical circles on paper. Their radius volition be equal to the height of the horn.
2. Cut out the details.
3. Make a cut from the outer circle to the eye forth the radius on either side on both blanks. Y'all tin cut a sector to brand the horn thinner and without much overlap.
4. Roll up the cones and gum the seam.
5. Y'all can cutting products from the bottom side.

And so, in a couple of minutes, simple volumetric horns are easily made.

Difficult but beautiful

Below is a style to make paper caprine animal horns more than realistic than the previous ones. The methodology is this:

1. Prepare a strip of paper, preferably thin (length and width depend on the size of your horns).
2. Make a bare in the class of a cone using the technology of the previous version, or brand a plasticine base of operations of a more than circuitous shape. If you have an object of a suitable configuration, such equally existent horns or a child's toy of a suitable size, utilise information technology.
3. Start wrapping your workpiece with newspaper record in a spiral, gluing the places where i layer overlaps with another.
4. Later on the mucilage has dried, remove the horns from the base. To facilitate this procedure, it is worth at first, before pasting with newspaper, cover the workpiece with cling film and do not air current the record besides tight.

How to fold newspaper horns?

You can brand caprine animal horns with your own easily using paper-plastic methods, when a blank of a certain shape is cutting out with marking future fold lines. You will become a design that resembles a box, only a rather complex shape. The same option is easy to gather from three dissever parts.

The seams are glued, or the elements are connected with adhesive tape. In the 2d instance, you lot will have to cover the surface with some material, for instance, glued napkins, threads, or use a beautiful decorative adhesive record that matches the color or paint.

The just drawback of this product is that it will turn out to exist somewhat angular, although this tin can be compensated for by a decorative layer of glue and paint practical over the threads.

papier mache horns

If y'all are all the same undecided on how to make do-it-yourself goat horns out of paper, you lot may like this option the nearly. The manufacturing technology is unproblematic, but it takes a sure time, and so information technology will not work to build horns in a few minutes in this fashion. The meaning of the work is as follows:

1. Take any bulk workpiece. If nothing suitable is at mitt, mold information technology yourself from plasticine. This is user-friendly, since yous can choose the size and shape you want.
2. Set many pieces of newspaper. You can use simply white, although magazine or even newspaper is suitable for the kickoff layers. Tear the pieces by hand or cut with scissors.
3. Before pasting, it is worth wrapping your workpiece with cling film so that it is easier to remove the newspaper-gum "shell" later.
4. Take PVA glue or prepare a paste and apply a layer on the workpiece.
5. Lay the pieces of paper in any direction randomly.
6. Subsequently the first layer has stale, repeat the steps as many times every bit necessary to obtain a sufficient thickness of the object.
7. Remove the made "shell". If this is very difficult to do and you are afraid of damaging the product, brand an incision on i side, and and then, subsequently removing information technology, glue it with one or more layers of paper.

Then you tin make horns of any shape. Afterward drying, the paper mixed with gum becomes hard and stiff enough. If you lot want to speed upwards the gluing procedure, you can mix the pieces of newspaper with the adhesive earlier applying it to the surface. Only in this instance, the parts should be smaller and so that the paper lies neatly and evenly and does not bulge.

How to make goat horns on the head?

If you are preparing a child for the New year's day tree and sewing a fancy dress for a caprine animal, lamb or other horned graphic symbol, y'all tin can utilize any of the presented methods for creating horns. Yous will only have to prepare an additional office - a rim on which the manufactured elements volition be stock-still. As a frame, a purchased plastic version is well suited, preferably already having horns in its design, for example, on springs fabricated of tinsel or rain. In this case, you only demand to fix your newspaper products on the finished frame.

If yous just have a decorative hairband, you will have to create the frame elements for the horns yourself. To exercise this, it is better to accept a strong wire and fix information technology in the appropriate places of the rim. Its surface will need to be decorated to friction match the color of the accommodate. Yous can, of grade, practice without a frame bare at all, and get in yourself from thick paper or cardboard.

So, you take seen how to make horns Cull the appropriate selection. Use the technique to brand both crafts and masquerade costumes for goats and other horned characters.

Source: https://minikar.ru/en/proverbs/kak-sdelat-rog-nosoroga-iz-kartona-kak-sdelat-rozhki-dlya-kozlika-iz/

Share this post